Natural Gas Regulator, 1-1/4"npt, P140R

Description

Belgas Natural or LP Gas Regulator, 1-1/4"npt
Inlet Pressure
: 10 psig (with standard 1/2" orifice)
Max Pressure
: 125 psig (with optional 1/8" orifice)
Approvals:
ANSI B109.4, CGA 6.18-M95, as service regulators
Standard Pressure Range
: 8-14"wc
Capacity (natural gas with 2"wc droop, 1/2"orifice)
2 psig > 14"wc, 830 mbth
5 psig > 14"wc, 1350 mbth
10 psig > 14"wc, 1720 mbth
note: natural gas, 1000 mbh = 1,000,000 btu/hr = 1000 scfh
Specify optional orifice size and spring range when ordering
Usage
:
Outdoor all applications or indoor if properly vented to outside
Vent Size
: 1"npt
Shipping Weight: 5 lbs,  shipment within 2 days upon receipt of payment.
Regulator is equipped with internal relief valve (IRV) meeting the National Fuel Gas Codes requirements for downstream over pressure protection for inlet pressures exceeding 2 psig.  If installed indoors the regulator should be vented outside by removing the wire screen over the vent opening and piping its 1 inch vent outside per code.
Regulator is also corrosion resistant with powder coated surfaces for outdoor installations.  The regulator may be mounted in any orientation, vertical or horizontal, as long as the stem is not pointing down.  If installed outdoors the regulator vent should be oriented downward to prevent rain or snow entering the vent by removing the two screws that attach the regulator top to its bottom and rotating the top to realign with the other two bolt holes. A 90 elbow can also be piped into the vent if it is desired to keep the regulator horizontal. Just reinstall the wire screen into the pipe fitting to prevent insects from entering.
We accept Paypal or VISA/Mastercard/AMEX/Discover cards for payment. We will ship to United States only.   Sorry, no international shipments.
All regulators are NEW in box from our inventory.  One year manufacturers warranty on all regulators.  We have over 50 in-stock!  We will tag per your instructions.
thanks for looking!